The Fulton Replacement Cable Keeper Kit # F501120 works with 1/4-inch diameter winch cables, or wire ropes. The hole in the keeper matches this dimension, which is shown in the linked photo. This works with cables like # DL24104 which is 50-feet long. view full answer...
From what I was able to find the towing capacity of the 2007 Suzuki Grand Vitara is 3,000 pounds when properly equipped. Consult the vehicle owner's manual to confirm.
The specs on the 2016 R POD 179 list a dry (unloaded) weight of 2,630 pounds with a gross capacity of 3,785 pounds. So provided you stayed under the 3,000 pound capacity of the vehicle (assuming that your specific model is rated that high) you could tow the R POD. However you will be near the max capacity of the vehicle,... view full answer...
I reached out to my contact at RoadMaster and the RoadMaster BrakeMaster Custom Seat Adapter, # RM-88277, for your 2013 Suzuki Grand Vitara is 3 lbs. view full answer...
If you are looking at the balls that come in the etrailer ball mount kit # 989900, ball # 19247, is coarse threaded and has a 1-1/2 inch nut and lock washer included. Ball # 19260 is also coarse threaded and it also comes with a nut and lock washer.
The shank diameter on each of these balls is 1 inch which is what the included ball mounts in # 989900 accept. view full answer...
The best way to transport bikes on your 2010 Suzuki Grand Vitara is to install a trailer hitch like Curt Class III hitch # C13001 and to then use a hitch-mount bike carrier. The advantages of using a hitch-mount rack are higher overall bike/weight capacity than any spare-tire-mounted rack, the ability to use the hitch for other items such as a cargo carrier # C18151 or for towing, and that your bike rack's and bikes' combined weight is carried by the vehicle's frame - it's strongest part.
If... view full answer...
You will want to measure the distance from the center of your hitch pin hole to the edge of your spare tire; the folding cargo carrier we have with the longest distance from the center of the hitch pin hole to the closest edge of the carrier when folded up is the 24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs # e98874. This carrier has 9-1/2" from the center of the hitch pin hole to the closest edge of the carrier when folded up, so it would likely be... view full answer...